-500x500.jpg)
| Product Specifications | |
|---|---|
| Tech Specs | |
| Product Type | Internal Desktop Power Supply |
| Rated Output | 240W |
| AC Input | 100–240V AC, 4A |
| Input Frequency | 50/60Hz |
| Motherboard Connector | 1 × Dell-Specific 6-Pin |
| CPU Power Connector | 1 × 4-Pin |
| Cooling | Integrated Fan |
| Common PSU Models | H240ES-02, L240ES-00 |
| Compatible Models | OptiPlex 3060, 3046, 3050, 5050, 7050, 3650 |
| Dell Part Number References | J61WF, DK87P, F484X, DW3M7, HT04K |
| Warranty Information | |
| Warranty | N/A |
The Dell OptiPlex 3060 240W Power Supply is a supplier-listed replacement PSU with a 6-pin motherboard connector and a separate 4-pin CPU power connector. It is intended for Dell desktop configurations that have been confirmed to accept this exact power supply arrangement.
Commonly listed models within the 240W replacement family include H240ES-02 and L240ES-00. Published supplier specifications identify a 100–240V AC input at 50/60Hz, a 4A input rating and an integrated cooling fan. The correct replacement must match the original unit's electrical ratings, connector wiring and chassis dimensions.
Explore the Dell OptiPlex 3060 240W Power Supply price in Bangladesh at IT Source. Before ordering, check the original Dell PSU model and part number. Dell's official specifications identify different factory PSU wattages for the OptiPlex 3060 Tower and Small Form Factor systems.
The Dell OptiPlex 3060 240W Power Supply is a replacement internal power supply marketed for selected Dell OptiPlex desktop configurations. Supplier listings associate the 240W H240ES-02 and L240ES-00 family with the OptiPlex 3060 and identify a Dell-specific 6-pin motherboard connector, a separate 4-pin processor connector, 100–240V AC input at 50/60Hz and an integrated cooling fan. However, Dell's published OptiPlex 3060 specifications list a 260W PSU for the Tower and a 200W PSU for the Small Form Factor, so 240W compatibility is not confirmed by the factory system specifications alone. The original Dell DP/N, power rating, connector pinout, physical dimensions and mounting arrangement must be checked before a replacement is selected.
The replacement PSU has a maximum rated output of 240 watts, as listed for the H240ES-02 and L240ES-00 power supply family.
This rating must match the approved requirements of the actual desktop configuration. A lower-wattage PSU should not be substituted for a higher-wattage factory unit without verified compatibility.
Dell's official technical specifications identify a 260W power supply for the OptiPlex 3060 Tower, including region-dependent efficiency variants.
Although replacement suppliers associate certain 240W units with the 3060 model name, this does not establish that they are suitable for every 3060 Tower configuration.
Dell specifies a 200W power supply for the OptiPlex 3060 Small Form Factor desktop.
The SFF version has different space and power requirements from the Tower. Do not choose a 240W replacement without confirming the original Dell part number, physical fit and electrical compatibility.
The advertised 240W replacement configuration includes one 6-pin main motherboard power connector.
This connector must match the original Dell motherboard's electrical pinout. It is not automatically interchangeable with a 6-pin PCIe graphics power connector.
A dedicated 4-pin connector provides processor power for compatible motherboards.
Confirm that both the 6-pin main connector and the 4-pin CPU connector match the original power supply before installation.
Supplier specifications for the commonly listed 240W replacement family identify an input range of 100–240V AC at 50/60Hz, with a 4A rating.
Always check the electrical ratings printed on the actual PSU label, as manufacturer revisions can differ.
The replacement PSU includes a built-in fan that helps dissipate heat produced by its internal electrical components.
Install the power supply in its intended position and keep ventilation openings clear for normal cooling.
This product is an internal power supply, not an external laptop-style adapter. It must be installed inside a compatible Dell desktop chassis.
Compare the original and replacement housings, mounting screws, rear AC inlet position and cable lengths before ordering.
H240ES-02 and L240ES-00 are commonly listed 240W power supply models with a 6-pin motherboard connector and a 4-pin CPU connector.
These model numbers identify a supplier-listed replacement family, but they should not be treated as guaranteed substitutes for an OptiPlex 3060 factory PSU without matching the original part number.
Supplier catalogs list Dell part number references such as J61WF, DK87P, F484X, DW3M7 and HT04K within the broader 240W replacement family.
These references may correspond to different revisions. Confirm the Dell DP/N printed on the original PSU rather than relying on a general cross-reference list.
Replacement sellers also associate this 240W PSU family with selected OptiPlex 3046, 3050, 5050, 7050 and 3650 desktop systems.
Compatibility is configuration-specific. Different Dell chassis and production revisions can use different power supplies even when their product names are similar.
The 6-pin and 4-pin connections supply the compatible motherboard and processor. Storage-device power distribution depends on the original desktop's wiring design.
Do not assume that every replacement includes identical SATA or peripheral power leads. Inspect the original unit and cable arrangement first.
A correctly matched replacement power supply can help restore desktop operation after the original unit has been confirmed defective.
Common power-related symptoms include failure to start or unexpected shutdowns, but these symptoms can also result from other hardware faults.
This replacement PSU family may be relevant to repair technicians and IT teams maintaining Dell business desktop computers.
Accurate part matching is especially important when servicing multiple OptiPlex models that use different factory power supply ratings.
Disconnect the desktop from AC power before servicing. Installation should be performed by a technician familiar with Dell proprietary motherboard power connectors.
Never open the PSU enclosure, alter the wiring or force incompatible connectors. Internal capacitors may retain dangerous electrical charge after the computer is disconnected.
The Dell OptiPlex 3060 240W Power Supply is intended for computer repair technicians, office IT departments, maintenance teams and desktop owners who have confirmed that their system requires this particular 240W, 6-pin plus 4-pin PSU configuration. It may be relevant when replacing a diagnosed faulty unit identified by a matching model or Dell part number. Because Dell officially specifies 260W for the 3060 Tower and 200W for the 3060 SFF, buyers should not select this 240W PSU solely from the computer model name. Matching the original electrical specifications, connector pinout and chassis design is essential.
Before buying, check whether your computer is an OptiPlex 3060 Tower or SFF and read the model number and Dell DP/N on its original power supply. Compare the factory PSU wattage, connector configuration, input and output ratings, housing dimensions and mounting points. Only choose the advertised 240W, 6-pin plus 4-pin replacement if its compatibility with the exact original hardware has been verified.
Photograph the original PSU label and both power connectors, then record the Dell DP/N and rated wattage. Confirm the computer's exact chassis type and compare its existing unit with the available replacement. If the original is rated 260W or 200W, do not assume a 240W model is suitable. Share the original PSU details with IT Source Bangladesh to verify the correct replacement, current price, condition and warranty before ordering.
Explore the Dell OptiPlex 3060 240W Power Supply at IT Source Bangladesh for desktop repair and replacement requirements. IT Source lists the 240W, 6-pin plus 4-pin power supply family, including H240ES-02 and L240ES-00 references. Before purchasing, confirm that the available PSU matches your original Dell part number and computer configuration. Contact IT Source to check the exact model supplied, product condition, stock availability, current selling price and warranty terms.
Some replacement sellers list 240W units for the OptiPlex 3060. However, Dell's official specifications identify 260W for the Tower and 200W for the SFF. Check the original PSU before choosing a replacement.
Yes. The advertised 240W configuration includes one Dell-specific 6-pin motherboard connector and one separate 4-pin CPU power connector.
Not without verified compatibility. The lower wattage, electrical pinout, power distribution and mounting requirements must be checked against the original Dell part number and system configuration.
Check the Dell OptiPlex 3060 240W Power Supply price in Bangladesh at IT Source.
Get specific details about this product from customers who own it.